New Aspects of Polymers Containing Quaternary Ammonium Groups

It was established that linear polymers with quaternary ammonium groups are obtained by the reaction of chloromethylated polystyrene (CMPS) with hydroxyalkylic tertiary amines when the amines contain one or two hydroxyl groups, and that crosslinked polymers are obtained with aminoether groups when the amines have three hydroxyl groups, i.e., tris(2-hydroxyethy1)amine. The aminoether units appear by intramolecular rearrangement of quaternary ammonium structural units. Kinetic studies on the synthesis of polymers with quaternary ammonium groups from CMPS, poly(N,N-dimethylamino-ethylmethacrylate), and poly(N,N-dimethylaminopropylacrylamide), were performed. The main factors which influence the kinetics of reactions are steric hindrance of near neighboring groups, hydrophilic effect for hydroxyalkylamines and polymer-solvent interaction.     

Evaluation of methoxy polyethylene glycol‐polylactide diblock copolymers as additive in hypromellose film coating

This paper deals with a new application of diblock methoxy polyethylene glycol‐polylactide block copolymers, a class of synthetic biomaterials largely studied in the pharmaceutical and biomedical fields owing to their favorable properties such as biocompatibility, biodegradability, low immunogenicity, and good mechanical properties. In this work, these materials were evaluated as additives for gastro‐soluble pharmaceutical coating aimed to reduce film stiffness and water permeability. Two copolymers with different polylactide chain lengths were synthesized and characterized in term of molecular weight and solid‐state properties. A series of free films with different hypromellose/copolymers ratio were prepared and characterized in terms of appearance, components miscibility, plasticity, and water vapor permeability. The obtained results demonstrate that copolymers effectively influence hypromellose film properties according to their concentration and molecular weight. Specifically, the addition of the copolymer with a molecular weight of 6.5 kDa in a ratio hypromellose:polymer 5:1, allowed to obtain films with good appearance, improved plasticization, and water permeability properties. For higher molecular weight, copolymer or different ratios was not possible to observe the improvement of all the properties at the same time. The results also make possible to define the critical features to improve in order to use block copolymers as additive in hypromellose film coating. The availability of new water‐soluble additives able to work as plasticizer and moisture sealer in polymeric films represents an important progress not only in the field of pharmaceutical coating but also in that of food coatings, as for example in the formulation of edible films. Copyright © 2013 John Wiley & Sons, Ltd.     

Quaternary Ammonium Polyelectrolytes. V. Amination Studies of Chloromethylated Polystyrene with N,N-Dimethylalkylamines

The amination reactions of chloromethylated polystyrene with N,N-dimethyldodecylamine, N,N-dimethyltetradecylamine, and N,N-dimethylhexadecylamine were studied. The physical properties, particularly the solubility properties of the resulting polymers, are influenced by the hydrophobic properties of the long alkyl chain on the N⁺ atoms. The main factor that influences the kinetics of the reactions is the polymersolvent interaction parameter.     

A unified theory for brittle and ductile shear mode fracture

A unified theory captures both brittle and ductile fracture. The fracture toughness is proportional to the applied stress squared and the length of the crack. For purely brittle solids, this criterion is equivalent to Griffith's theory. In other cases, it provides a theoretical basis for the Irwin-Orowan formula. For purely ductile solids, the theory makes direct contact with the Bilby-Cottrell-Swinden model. The toughness is highest in ductile materials because the shielding dislocations in the plastic zone provide additional resistance to crack growth. This resistance is the force opposing dislocation motion, and the Peach-Koehler force overcomes it. A dislocation-free zone separates the plastic zone from and the tip of the crack. The dislocation-free zone is finite because molecular forces responsible for the cohesion of the surfaces near the crack tip are not negligible. At the point of crack growth, the length of the dislocation-free zone is constant and the shielding dislocations advance in concert. As in Griffith's theory, the crack is in unstable equilibrium. The theory shows that a dimensionless variable controls the elastoplastic behaviour. A relationship for the size of the dislocation-free zone is derived in terms of the macroscopic and microscopic parameters that govern the fracture.     

Density lower bound estimate for local minimizer of free interface problem with volume constraint

We prove a density lower bound for some functionals involving bulk and interfacial energies. The bulk energies are convex functions with p-power growth not subjected to any further structure conditions. The interface \(\partial E\) is the boundary of a set \(E\subset \Omega \) such that \(|E|=d\) is prescribed. Then we get \(\mathcal {H}^{n-1}((\partial E{\setminus }\partial E^*)\cup \Omega )=0\).

     

Quasilinear Parabolic Stochastic Evolution Equations Via Maximal Lp-Regularity

Potential Analysis - We study the Cauchy problem for an abstract quasilinear stochastic parabolic evolution equation on a Banach space driven by a cylindrical Brownian motion. We prove existence...     

Ionic electroactive polymer metal composites: Fabricating,modeling, and applications of postsilicon smart devices

Smart systems adapt to the surrounding environments in a number of ways. They are capable to scavenge energy from available sources, sense and elaborate external stimuli and adequately react. Electro Active Polymers are playing a main role in the realization of smart systems for applications if fields such as bio inspired and autonomous robotics, medicine, and aerospace. This paper focus on the possibility to use Ionic Polymer Metal Composites as a class of materials relevant to the realization of post silicon smart systems. The three main aspects of this new technology, i.e., fabrication methods, modeling, and applications are described with emphasis to most recent results. Attention is given to main challenges and shortcomings to be solved for technology, modelling, and control of IPMC based devices that need to be solved before this new technology can be fully exploited in real world applications. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013     

A comparison of the structure,flexibility and mesogenic properties of 4-methoxy-4′-cyanobiphenyl and the α,α,α-trifluorinated derivative

Abstract

The compound 4-cyano-4′-(α,α,α-trifluoromethoxy)biphenyl (1OCBF₃) has been synthesized. Unlike the fully protonated analogue, 4-cyano-4′-methoxybiphenyl (1OCB), it does not show a liquid crystalline phase on cooling from the melting point (51°C) to room temperature. The transition temperature to a monotropic nematic phase was obtained as approximately 0°C by determining the transition temperatures of mixtures with 1OCB. The structures, conformational properties and orientational ordering of both 1OCB and 1OCBF₃ as solutes in a nematic solvent ZLI 1132 have been investigated via the 17 dipolar couplings obtained by analysing the proton and fluorine NMR spectra of these solutions. It is concluded that the major difference between the two molecules lies in the potential, V(φ₂), governing rotation about the ring–oxygen bonds. In 1OCB the potential has the same form as in anisole, with a minimum when the C–O bond is in the plane of the attached ring (φ₂ = 0°), and a maximum of about 15 kJ mol^?1 when φ₂ is 90°. In 1OCBF₃ the barrier to rotation about the ring–O bond decreases substantially to being near zero.